Home » 2023 » September

Monthly Archives: September 2023

September 2023

Water Heater Replacement – Why You Should Leave it to the Pros

Water Heater Replacement Denver can be a major undertaking. It’s usually best left to the pros.

Water Heater

Rising energy bills, rusty water, slow leaks, and corroded tank liners are good reasons to replace a hot water heater.

Changing the fuel type is another consideration, and can add to project costs. Adding electrical wiring and gas lines requires the services of an electrician and plumber.

The water heater is one of the most important household appliances. It powers everything from hot showers to laundry and dishes. But, when yours is on the fritz, it can be a major disruption to your family’s routine. It can also be a costly one, as you may have to pay for emergency replacement service.

A new water heater is a considerable investment, and there are many factors that can influence its cost. First, you must determine what kind of heater you want to replace yours with. There are several different options, including tank and tankless models, as well as gas or electric. You will also need to decide between power venting and direct venting. Power venting adds around $300-$600 to your total. Direct venting brings combustion air from outside and exhausts it directly outdoors, adding another $500-$1,000 to your price.

There are also extra expenses to consider if you’re changing the location or converting to a different fuel type. These can include carpentry costs, if needed, and additional labor to move piping. You may also have to spend on a new breaker box and gas line, depending on your installation plan.

A professional plumber will be able to give you an accurate estimate for the cost of your new water heater installation. They will be able to help you choose the best style for your home and budget, as well as install it correctly. In addition, a plumber can help you figure out the right size of the heater to fit your needs.

If your water heater is older and more likely to break down, you should invest in a replacement sooner rather than later. A newer model will be more energy efficient and save you money on your utility bills. It will also be able to hold more water and provide faster heating.

You should also factor in the cost of a new expansion tank, which can run from $100 to $350. The tank helps control pressure and prevents overflow. It is necessary for water heater safety and should be replaced every five years. You should also consider investing in a warranty, which can protect you from expensive repairs.

Energy Efficiency

When shopping for a new water heater, pay attention to the energy efficiency rating. This figure, displayed on a sticker on the unit, indicates how much the model costs to operate annually. A higher number means the model is more efficient.

The type of fuel used to power the unit can also affect its energy efficiency. Gas-powered units with sealed combustion and powered venting offer superior efficiency, as these systems separate combustion air from house air. They also have a fan to assist in exhausting the gases, which helps reduce energy consumption.

Upgrading to a heat pump water heater can also save money on utility bills, as these models use less energy than conventional electric ones. However, they may not work well in cold climates where temperatures drop below freezing.

You can reduce energy usage by installing low-flow showerheads and faucet aerators, and reducing hot water consumption when possible. However, the best way to lower your energy bill is by installing a more efficient water heater. A trained Carter professional can help you select the right model for your home and budget.

If your current unit is old and prone to malfunction, consider upgrading it. Newer models are more reliable and offer better energy efficiency. They also come with longer warranties, so you can be sure that the replacement will last. Look for features like anti-scale devices, which reduce the buildup of mineral scale on heating elements, and brass drain valves, which are more durable than plastic ones.

It’s important to have a plumber install your new water heater, as the labor involved is extensive and complex. It’s also essential to choose a contractor with experience with your particular water heater style. For example, if you’re replacing a tankless system, make sure your installer knows how to install that kind of heater correctly.

A plumber can also help you decide where to locate your new water heater. For maximum efficiency, place it in a warm area with easy access to your kitchen and bathrooms. Ideally, it should be located close to the main water line so that you don’t have to travel a long distance for hot water.

Life Expectancy

Nothing lasts forever, and even the most reliable water heaters have a lifespan that eventually comes to an end. Many homeowners don’t realize when their water heaters are reaching the end of their life expectancy, and they can experience a lot of inconvenience if they wait too long to replace their old water heater. However, you can avoid this inconvenience by keeping an eye out for certain warning signs that your water heater is approaching the end of its lifespan.

The first warning sign is when your hot water starts running out quickly. This is caused by mineral deposits that build up in the tank and prevent it from heating up. You can try a few things to fix the problem, but if you’re constantly experiencing this issue it may be time for a new water heater.

Another sign that your water heater is nearing the end of its lifespan is when you start to notice rust on the surface of the tank. This can be a dangerous issue because it means that the metal is starting to corrode, and this can lead to leaks. If you see rust on the surface of your water heater, it’s important to call a plumber right away to have it replaced.

Another sign of a deteriorating water heater is when you start to hear gurgling noises during use. This is a sign that sediment has built up in the tank, and this can cause the water to become rusty. In addition, a large amount of sediment can also decrease the water heater’s efficiency and cause it to consume more energy.

Another sign that your water heater is getting close to the end of its lifespan is when you start seeing puddles on the floor around it. This is a sign that your water heater is leaking, and it can cause damage to your home and your belongings. Leaks can be repaired, but if you see water on the floor of your house, it’s best to get a professional to take a look at your water heater.


There are many factors that go into the installation process of a new water heater. It’s important to choose a model that is the right size for your household. If you have a smaller home or live alone, a 40-gallon tank may be enough for your needs. If you have a larger household or live with several people, a 50-gallon or 80-gallon tank may be more suitable. A professional will help you determine the best size for your household.

During the replacement process, you’ll need to shut off the water supply. This is usually done using the water heater’s water shut-off valves, which are usually color-coded (blue for incoming cold water, red for outgoing hot water). After that, you’ll need to drain the old tank. This can be done by attaching a garden hose to the drain valve and then emptying the tank into a bucket or floor drain. Then, you’ll need to disconnect and move the old tank.

Once the tank is moved, you’ll need to install the new water heater and connect the pipes. If you’re replacing the hot water line, you’ll need to add a copper slip coupling and a pair of short, plastic-lined nipples to prevent galvanic corrosion. You’ll also need to solder the new water line to the water heater.

If the water heater is being installed in a new location, it will need to be mounted on a wall. This is typically done with screws and a mount kit that comes with the unit.

Then, you’ll need to install the temperature and pressure relief valve and a discharge line per the manufacturer’s instructions and local code. If you’re changing from an atmospheric vent to a powered direct vent or a natural gas water heater, it is a more complex project and should be handled by a pro.

Before you start working on the water heater, turn off the power to it by switching off the circuit breaker or removing the fuse. Then, carefully remove the junction box cover and connect the electrical wires to the terminals on the water heater. Once all the connections are made, replace the cover and switch on the power to the water heater.